Firmware Software

Press the  {} MENU  button and go to the User Menu screen, make sure  hurt the indicator (arrow) is pointed and highlights the "Picture Control". The buttons on top of the remote are set to TV & VCR respectively. Set sleep timer minutes to "0" and while it can display, simultaneously  press the  {STATUS} & {VIDEO} DISPLAY  buttons. The main service menu will display your choices with # 1 through # 9th  Press one of the number keys to enter Corresponding hurt menu. Use the  {+} CH {CH}  buttons to navigate within the menu.  Use the  {VOL +} {VOL-}  buttons to change the values.  Use the  {} MUTING  button to memorize the changed value.  Use the  {} BACK  button to exit the service menu. Turn the TV on.  Using the remote control: Press the  {INFO}} & {MUTE  buttons at the same time.  The Service Menu will be display Use the number keys to select the category.  Use...

Turn the TV on.  Press the  {} MUTE  button three times on the remote.  Press the  {} MUTE  button again on the remote and-hold.  Then press the  {} MENU  button on the TV's front panel.  Both release buttons  There Should Be the letter "S" on the upper right of the screen.  Press the  {} MENU  button on the TV's front panel again. You are now in Service Menu.  Use the  {+} or {CH} CH-  buttons to select the item.  Use the  {VOL VOL +} and {-}  buttons to adjust the value.  Turn the set off to exit the Service Menu. Turn the TV on.  Press and hold the  {} VOL-  button on the TV.  Press and hold the  {9}  button on the remote.  The Service Menu will be display. Use the  {+} or {CH} CH-  buttons to select the item.  Use the  {VOL VOL +} and {-}  buttons to adjust the value.  Turn the set off to exit the Service Menu. LCDs...

Sharp Aquos LC-80LE632U Service Menu Instructions Turn the LCD on and then unplug the power cable. While pressing and holding the {INPUT} & {VOL -} buttons on the remote, plug the power cable back into the outlet. When it powers up you will see a little "k" appear in brackets.Then on the TV, press the {VOL -} & {CH -} buttons at the same time. The Service Menu will be displayed. {CH +} & {CH -} buttons navigate through options. {VOL+} & {VOL-} buttons change values. To exit, turn the power off. Unplug the TV  Press and hold the  {VOL -}  &  {CH} +  buttons.  While holding the buttons above, plug in the TV.  The TV will turn on with the Service Menu Display. There are five category menus:  Deflection - Signal - Feature - Fixed Value - EEPROM  Use  {CH} + {CH -}  buttons to select the category.  Note: Not all models will have five categories.  Some will jump to 'Signal' category. Use  {} VOL +  ...

RPTVs: F59 SERIES Press and hold the  {} MENU  button on the TV.  Then press the  {MENU 8} {} {} SELECT  buttons on the remote.  To exit, press the  {} MENU  button on the TV or  the  {} EXIT  button on the remote control. DCAM Mode: Using the remote control:  Hold down the  {TV}  button.  Press the  {} MENU  button.  Press the  {INFO}  button.  Release the  {TV}  button.  Remote Control Key Functions When In DCAM Mode: INPUT {} ............. Blue (13x9 adjust)  {} ............ ASPECT ROM Write  {DAY / NIGHT} ....... ROM Read ..  {MENU} .............. Remove Color  {EXIT} .............. Cross Hatch / Video Mode  {INFO} .. ............ Green  {GUIDE Calculation .............}  {2} ................. Cursor Up  {5} ................. Cursor Down  {6} ................. RIGHT cursor  {4}. ................ CURSOR LEFT  {0...

Panasonic Service Modes PD60U / PX6U / PX60U / PX600U  PD50U / PX50U / PX500U Hold down the  {VOL -}  button ON THE PLASMA TV.  Press the  {} RECALL  button three times on the remote.  The Service Menu will be display.  Use  {1} {2}  one remote to navigate main menu items.  Use  {3} {4}  on remote sub-menu items to navigate.  Use  {VOL VOL +} {-}  for remote item of value to change.  Write down all values before changing  Once the value is changed, THE CHANGE IS MADE.  Power off to exit service mode and save. PA25UP / PD25UP / PX25UP: Using the remote control:  Press the  {} MENU  button.  Set "Antenna" to "Cable".  Select "Timer" menu and set the sleep timer to 30 min.  Press  {S}  Twice to exit menus.  Tune to channel 124.  Press and hold  {VOL -}  button ON THE PLASMA TV. "CHK" at Appears in top-left corner Followed by five letter ...