All Service Modes LCD LED TV

4 eBooks Package Price 55 USD

Mix Models Service Modes For LCD LED Plasma Crt Tv.



Dansat Rapitron Cobay Akira Intex

Enter menu, Hi-Lite “audio” then enter 8893 Mode/Source 2580



Dynex

Source/Input 2580

Hold Vol down on TV and hold the (#1) button on remote



Element China

Menu 0000 > menu 1147



Haier

Pull up menu, Hi-Lite “audio” then enter 8893.



Hisense

 “Parental ” enter 0000 then select

“Clean All ”



Insignia

Input 2580 (TV is on)



LG / Zenith

Hold MENU on TV and MENU on remote for 5 to 10 seconds,



Mitsubishi

Menu 123 or Menu 2470 (TV is on)



NEC

While powering ON, hold "MENU" or "INPUT" on TV,



Panasonic

Hold [ VOL-- ] on TV, press and hold menu button on remote.



Philips

Push Menu , select  062596



Polaroid

Hold [VOL--] and [CHANNEL--] or hold [VOL+] and [CHANNEL+]

(TV is on)



Proscan

In customer menu go to setup, select parental control menu,

enter 0000 then select “clear channel list”.



RCA

Menu 1147



Sanyo

Hold VOL Down on TV, press and hold #1 button on remote,

VOL will jump to halfway and set shuts off.

Turn back on have 1st time setup screen.



Samsung

Mute 182 power



Samsung (European)

Power off, Info - Menu - Mute - Power,



Seiki

Menu 0000



Sharp

Menu, 1999

Menu, 3481

Menu, 1147

While holding [ VOL– & INPUT ] buttons on TV plug in set when

“K ” appears push (VOL– & CHANNEL-)



Sony

Hold “arrow up” on Remote and push power button on TV (TV

is ON)



Symphony

Source/input 2580



Toshiba

On Menu, select “Installation”, then “ System Information” press

the right arrow button.

(“System Information” will change to “Factory Reset” or

something similar)





Service Toshiba LED



to enter the Service mode

adjust the volume to zero , press the mute twice from the remote and press the menu button on the TV

(fourth button from the bottom and marked p and decree it shares) ..

to exit the menu shut the TV



to enter Click on Oak control of top and bottom of the image , as specified in red



Or

 By Imran Ashraf

+923139292880



Press "Mute" & 'Menu" buttons on the remote control simultaneously.Press "Menu"' button on the remote control, and enter {4 => 7 => 2 => 5}Press 'Volume Down' button on the front panel of the TV and press and hold digit '9' on the remote control.



OR



With No Menu displayed on the panel, press 'AV" & "F' buttons simultaneously.Enter code {1 => 0 => 4 => 8} by the remote control.



OR



Press 'Mute' button on the remote control.Press 'Mute' button again.  While keep pressing the 'Mute' button, press "Menu" button on the TV SET."S" will be displayed at top right corner of the screen.Press 'TV (ANT) / VIDEO" button on TV; to get a single Horizontal Line On | Off [to adjsut screen voltage]Press 'TV (ANT) / VIDEO' button on the Remote Control; to select internal Test Signals.Use 'Ch Up | Ch Dn' buttons to call an item to adjust.Use 'Vol Up | Vol Dn' buttons to adjust the data value to selected item.To make adjustment menu On \ OFF, press 'Menu' button.To 'initialize' the memory IC (QA02), press "Recall + Channel Up" button on the 'TV'.Press 'Recall + Channel Dn" button on the 'TV', to initialize self diagnostic data.



Vestel

Menu 4725 then select "RESET"



Vision Quest

Source / Input 2580



Vizio

 menu under “Help” tab is Factory Default enter

0000



Haier LCD

1. Press “MENU/EXIT”;

2. Press”1”+”9” +”9” +”9”;

3. Press “OK”



Panasonic

While pressing [VOLUME ( - )] button of the main unit,

press [INFO] button of the remote control three times

within 2 seconmo



AOC

TV mode adjust volume to zero, press mute key

and press number key 9 8 7 6 .



TCL

 Service mode = Press *MENU*, Select *CONTRAST*  then  enter *9735* or *1950*  you will enter *Factory mode* and *Design mode* respectively.



By Imran Ashraf