Firmware Software

JVC LT-26DE9BJ - LT-26DE9BU - LCD TV - HOW TO ENTER SERVICE MODE [FACTORY MODE] - FACTORY SETTINGS - [Initial Settings] & Universal Remote Control Set-up Codes. TO ENTER SERVICE MODE This TV can receive both DVB-T (Digital terrestrial broadcasting), DVB-S(Digital satellite broadcasting: DB9 only) and Analogue terrestrial broadcasting. This television has PVR (Personal Video Recorder) function that allows you to record a program in the installed hard disk drive. By connecting a HDMI compatible device, high definition pictures can be displayed on your TV in their digital form. Press [ INFORMATION ]key and [ MUTING ]key on the remote control unit simultaneously to enter the  FACTORY MODE SCREEN-1 . Press [ ► ] key on the remote control unit simultaneously to enter the  FACTORY MODE SCREEN-2 Press the [OK] key to exit the factory mode. {CLICK ON PICTURES TO ZOOM IN} SELECTION OF SETTING ITEM For scrolling up / down the setting items:   [FUNCTION  ▲/▼  ] key...

SERVICE [FACTORY MODE] Enter the factory menu (can use the IR) and press the remote key [ ◄V- ] to  “0’, press mute remote key, then press  9 , 7 , 3 , 5  remote key. Press [ ► ] key to enter the sub-menu and press MENU key to return the main-menu. ADJUSTMENTS Adjust the temperature in CMP, VGA, AV. Make sure the picture mode is set to “Stand”, the “Picture  à Black expand” on the user Menu is set to “OFF”. “Other  à Flesh Tone & Adaptive Luma Control ” on  the factory Menu is set to “OFF”. After Alignment, the entire item will change to “ON” ADC ADJUST For CMP input, the test signal is 576i/50Hz,100%, 8 steps colour bar. Select the “Balance  à RGB Calibrate” on the factory Menu, then press “ à ”, ADC adjust is finished after “OK” is displayed For VGA input, the test signal is 1024×768/60Hz white/black grid. Select the “Balance  à  RGB Calibrate” on the factory Menu, then press “ à ”, ADC adjust is finished after “OK” is displayed. VGA AD...

LCD LED TV Bypassing Volume 2 By Imran Ashraf. WhatsApp +923139292880 Contact lcdledebooks@gmail.com