Firmware Software

Blind Factory Reset Before trying to EEPROM reset, please try a factory reset, that might revive your TV also. Press "EXIT" button for 12 seconds (15 is better since you cannot see TV), than press "Left" and "Enter" This wiki entry will not help resolve a TV bricked by firmware flashing. One example (from the original post of this wiki): As I bricked my D series device by miss service menu setting, I search for solutions to recover it. After with help of friend we unbricked device with the same way of C series TVs ... Here I wanted to try to let you know how the process is working. Firstly, this hack doesn't work if you bricked you device by firmware flashing... This hacks just removes service menu settings and let you give another chance to fix settings... Also you needed to find correct values for your TV after resetting NVRAM like Model / Type / Tuner / Font Color and others. It's better to have screen shots of your service menu. You can also ...

Here we discuss How to reset the television to the original factory settings. WARNING FOR LCD AND PLASMA TELEVISIONS:   This procedure will reset the video calibration settings of the TV. If you paid to have your TV screen specially calibrated, you may want to first try  performing a power reset  instead. Otherwise, any special calibration settings will be lost. IMPORTANT: The supplied remote control is necessary to perform this procedure. If lights on the front of the TV are blinking or flashing, refer to the following: Red, green or orange lights are on or blinking on the TV. Unplug the TV power cord (mains lead) from the electrical outlet. Allow the TV to remain without power for one minute. Plug the power cord (mains lead) back into the electrical outlet. NOTE:  The TV should turn on automatically. If it does not, turn it on. Wait approximately 40 seconds for the TV to completely start up. On the TV remote control, press and hold the  UP ARROW  button. ...